1981 Pearson 323 Hull #319 - Looking for Mast Specs

[nickzchef]

Hello, all is this discussion active?  Just tried to post and it disappeared when I hit post

Nick
401 486 3774

Looking for mast specs, total length, make (I think MetalMast) and best place to buy new in New Bedford Mass area or RI
and is there a great used mast for sale anywhere with Shrouds?

[Alma]

My mast is approx 46' above the water and an additional 2' to the bilge.

Try opening a new tread Nick.

[Chance]

 The  mast of Chance  pearson 323 1977  which is laying on saw horse for the winter.  I measure today is 46 feet 6 and 1/2 inches, that measurement was from the bottom of the al tube to the top of al tube.  This does not include the top mast head , which goes on top of the tube  has all blocks in it for the jib , main and spin hoist .                                                  Bob Kraus CHANCE  Hull 10  41 years

[Captain Bri]

My 1981 hull #288:

Mast length of 46' 8" (total for extrusion, not including mast-head) 

I also measured from the top of the mast extrusion to the center of the large bolt securing the lower shrouds - 19' 10"