Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - chuck stas

Pages: [1] 2 3
1
P303 / Re: p303
« on: March 15, 2024, 10:13:01 AM »
It's the original engine Yanmar 2gmf. 13hp diesel.
The Zink I put on last year seems to be working.
If I replace the shaft at some point Ill make it about 2" longer.
Right now don't fix it if its working.
Thanks for getting back to me.

2
Steering System, Hull Structure / Re: Pearson 323 Skeg
« on: December 30, 2023, 12:09:28 PM »
good luck with it, Have a Great New Year.

3
Steering System, Hull Structure / Re: Pearson 323 Skeg
« on: December 06, 2023, 10:41:22 AM »
Last year my skeg looked the same as yours.
I sanded some, than filled the gap with epoxy faring Than painted .
Just pulled the boat out and it still looks good.
easy project. Good Luck.

4
New Member Introductions / Re: Pearson 36-2 New Owner
« on: November 03, 2023, 11:10:55 AM »
Good Luck with it.
Enjoy.
what year ?

5
P39 / Re: Pearson 39 Specifications (1970 model)
« on: September 21, 2023, 10:54:51 AM »
good luck with it.

6
P303 / p303
« on: August 30, 2023, 11:29:55 AM »
Is there a zink on the shaft of a P303 1983
When I hauled out there was no room for a zink on the prop shaft. I put one at the end of the shaft, conical shape.
Was thinking I should order a longer prop shaft.
Let me know
Thanks in advance

7
New Member Introductions / Re: New 323 Owner
« on: August 20, 2023, 09:44:18 AM »
Good Luck.
Should be Fun
Take a lot of pictures

8
General Discussion / Re: motor mounts
« on: July 27, 2023, 08:56:44 AM »
Thanks for the info. The demo on how to swap out the mounts is great.

9
Steering System, Hull Structure / Re: Rudder to skeg play
« on: July 06, 2023, 09:43:14 AM »
No movement on my P303 rudder .
Might need a bushing on the bottom at next haul out.
good luck

10
Steering System, Hull Structure / Re: Steering pedestals
« on: July 06, 2023, 09:36:26 AM »
could use a picture
mine has 4 bolts

11
General Discussion / Re: motor mounts
« on: June 19, 2023, 10:01:47 AM »
Thanks for the info. I'll look them up

12
Thanks for that info.

13
General Discussion / motor mounts
« on: May 18, 2023, 10:15:58 AM »
Good Morning, Does anyone have a good source for motor mounts for a 1983 p303 13 HP yanmar diesel.
The engine is shacking like crazy Sometimes.
Thanks for any info.

15
Deck Mounted Hardware / Re: Weird Bow Chocks on 1972 Pearson 30
« on: April 29, 2023, 10:12:01 AM »
looks like there might be some leaks up there.
If it were mine I'd open it up to see, then rebuild as needed.
It should be a fun project, Learning experience.
Good Luck

Pages: [1] 2 3