Pearson Yachts Forum
Pearson Boats - Common Systems => Mast and Spar Issues => Topic started by: nickzchef on March 10, 2018, 10:59:49 PM
-
Hello, all is this discussion active? Just tried to post and it disappeared when I hit post
Nick
401 486 3774
Looking for mast specs, total length, make (I think MetalMast) and best place to buy new in New Bedford Mass area or RI
and is there a great used mast for sale anywhere with Shrouds?
-
My mast is approx 46' above the water and an additional 2' to the bilge.
Try opening a new tread Nick.
-
The mast of Chance pearson 323 1977 which is laying on saw horse for the winter. I measure today is 46 feet 6 and 1/2 inches, that measurement was from the bottom of the al tube to the top of al tube. This does not include the top mast head , which goes on top of the tube has all blocks in it for the jib , main and spin hoist . Bob Kraus CHANCE Hull 10 41 years
-
My 1981 hull #288:
Mast length of 46' 8" (total for extrusion, not including mast-head)
I also measured from the top of the mast extrusion to the center of the large bolt securing the lower shrouds - 19' 10"