Recent Posts

Pages: [1] 2 3 ... 10
1
Exterior Finish and Fiberglass / 1980 365 damaged toe rail
« Last post by gbernier on May 19, 2024, 06:26:25 PM »
We are beginning a project to refinish the bright work on a 1980 365 hull number 6444926. There is damage to the toe rail on one side. I would like to find out if it is possible to obtain some dimensioned drawings of these components. Any help would be appreciated.
2
New Member Introductions / Re: New Owner
« Last post by chuck stas on May 19, 2024, 11:16:33 AM »
Good Luck enjoy hope all works out well.
Good things take time.
3
P34 / Pearson 34 rudder shoe / bushing
« Last post by Rol1964 on May 18, 2024, 03:07:16 PM »
Searching for original design info with respect to the rudder pin as it sits in the shoe...is there supposed to be a bushing or did the pin simply sit in the bore of the bronze shoe? Can't find this info anywhere...possible purchase of a P34. Maybe the rudder installation was the same as several other models...?  Thanks for any help.
4
New Member Introductions / New Owner
« Last post by Argh2sail on May 14, 2024, 06:37:44 PM »
Hi
I'm Gary and I bought a 365 sloop, Hull 381 called Toymaker in 2022.  I am hoping to have her out on the water after a 2 year delay.
5
What is the deck to hull joint style on Alberg 35 1968
6
Ports & Hatches / original finish on fixed ports circa 1979
« Last post by geneb on May 02, 2024, 01:54:14 PM »
Does anyone know what the original black finish on the fixed ports in the main cabin was? Hull 219  1979
Powder coated?  Enamel? etc.
7
General Discussion / Source for Pearson 28-2 rudder
« Last post by Bird Dog on April 27, 2024, 12:09:09 AM »
Dropped the rudder on my 1986 Pearson 28-2 to investigate a rust stain coming down from the top.  Boat yard is of the opinion water is getting in from the top seam.  I'm weighing all options; split it open to investigate and see if it is repairable (preferred), or worst case, buy a new rudder.  But looking at similar sized boats, a new rudder comes with some sticker shock!

Thing is, I have not found anyone who sells a rudder for a 28-2.  Any ideas if it is hull specific, or if the same rudder was used on other models?  Starting from scratch on this...  Any recommendations where to find one?

Thanks

Ben
8
Steering System, Hull Structure / Re: Keel Nuts/Bolts - P26
« Last post by JunkFood on March 30, 2024, 03:42:29 PM »
Did you end up solving this issue?

I'm doing a P26 restoration and I'm seeking keel bolt advice.
9
Sails and Canvas / Re: loose or fixed foot
« Last post by Alma on March 25, 2024, 08:52:44 PM »
I have a brand new North mainsail loose footed.

It is fantastic and if you haven't priced North lately you may be in for a pleasant surprise.
10
Sails and Canvas / Re: loose or fixed foot
« Last post by selene on March 24, 2024, 11:16:16 AM »
Loose foot. Better shape for different outhaul tensions - plus (imho) easier to set/douse. I love my full batten loose foot main!
Pages: [1] 2 3 ... 10