Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Dave G

Pages: [1]
1
Ed, thanks for the info on what to look for while inspecting the P-323.  I believe they replaced the previous Yanmar with a new one a few years ago due to that seawater intrusion during the winter months (they keep the boat in the water year round).  Good points about engine plumbing, prop shaft and rudder play.  I went on an informal sea trial yesterday in the NY Harbor.  We had a chance to fly the spinnaker--that took a bit to rig, but once up was great fun.  Owner's daughter pointed out 3 areas of slight weeping (the two aft fixed port lights and one port V-birth port light).  The helm seat, if you want to call it that, was pretty uncomfortable at any decent heel.  Other than that, which I can get creative to remedy, it was a great, comfortable sail.  I'm excited to join the P-323 family.  First things first:  finalize deal with owner and then get a survey.  Thanks again.  Dave G

2
Thanks for your insight, Ed.  I've been studying this a bit for the last week ad it seems that others with a fin keel and skeg-hung ridder are doing this successfully. There are so many lobster pots where I am it will needs to be addressed. Some say, rope cutter on the prop shaft, others say some kind of cable or rope. All mentioned the issue of a cable and haul out.  Will need to weigh the options--one of which is to eliminate the boat as an option. Dave

3
Hi.  New to the group. Posted this in "323" as well.  I sail a 24' modified full-keel sloop. Perfect for the Down East waters with lobster traps so thick you can walk across them.  I've been looking to get something gibber for cruising and have the opportunity to purchase a 323 at a nice price (long-time friends that are stepping out of the sailing).  They have owned the boat since new or almost new.  MY QUESTION: Is there any reason that you can't install a cable 3/8" cable from, the bottom of the fin keel to the skeg to keep the lobster lines from getting caught up?  I've never heard of this before, but it seems like this could be done with a little planning on the hardware and attachment points.  also, how long (fore to aft) is the skeg dimension at the bottom.  I've seen some similar Pearson models' skegs are about 6".  Thanks in advance.

4
P323 / 323 in Lobster-Trap Infested Waters?? A question for you all.
« on: June 21, 2021, 11:53:36 AM »
Hi.  New to the group.  I sail a 24' modified full-keel sloop. Perfect for the Down East waters with lobster traps so thick you can walk across them.  I've been looking to get something gibber for cruising and have the opportunity to purchase a 323 at a nice price (long-time friends that are stepping out of the sailing).  They have owned the boat since new or almost new.  MY QUESTION: Is there any reason that you can't install a cable 3/8" cable from, the bottom of the fin keel to the skeg to keep the lobster lines from getting caught up?  I've never heard of this before, but it seems like this could be done with a little planning on the hardware and attachment points.  also, how long (fore to aft) is the skeg dimension at the bottom.  I've seen some similar Pearson models' skegs are about 6".  Thanks in advance.


Pages: [1]