Pearson Boats - Common Systems > Ports & Hatches

What Are the port sizes

(1/1)

Derrick:
What Are the port sizes for ports in head and v berth areas. 410 or 414
Thanks

selene:
I measured mine (#212) as 414s.

rnebergall:
Mine (Zufrieden #344) are also 414. 

Derrick:
thanks.

Chance:
On Chance Hull 10 replace all four in 2015 .  Bought  414 in size ,all opening are now  install with screens great cross ventilation. I purchase them from Fisheries Supply .  I also used the one with the closing knobs for a better seal .  They  were Beckson  P.O. BS-2-1 with the knobs .  The Cams were 414-BS-10 . Used pearson site for information on install very help full.  On voids between the  inside liner and outside truck cabin, put rod foam to keep  West  epoxy  from running out . You must thicken the epoxy also  to do sides and top, use spacer and clamps as pearson  site shows.
Bob K 

Navigation

[0] Message Index

Go to full version