Pearson Boats - Common Systems > Electrical Systems & Electronics

high output alternator for volvo-penta md11c

(1/3) > >>

rbrtfeld:
has anyone upgraded to a high output alternator for the Volvo penta MD11c? Any tips and what they used would be helpful. I am considering a balmar High Output and need any help that is available.

bucktastic:
rbrtfeld - I know this post is many years old but I now find myself in the same position with an MD11C. I'm re-doing much of the electrical and in disconnecting the alternator I found all the connection posts completely corroded from years of neglect from the PO. Do you mind sharing what route you went and any difficulties you ran into?

Much appreciated,
Brent

rbrtfeld:
I got a 100 amp from RO water in the San Diego area. They were great to work with and knew exactly what I needed for the MD11. Here is the link
http://cruiserowaterandpower.com/High_Output_Alternators.html

I would recommend that you research as much as you can before you make decisions on your final choices. Good luck and fair winds

Bill1188:
I have an MD11c in my garage which came out of my boat earlier this year. Fresh water parts to include the alternator.

WerkWerk:
Bill do you still have that MD11C laying around? Im looking for a discontinued part that retains the cable which attached to choke

Navigation

[0] Message Index

[#] Next page