Both of my bulkheads , the main Salon and the V Birth were rotted out at the bottom. I removed and replaced them. Attached are pics from the Salon Bulkhead once replaced. I still have some filling and painting to do, as well as sanding of the wood work and clear coating.The Salon bulkhead was remade in 3/4 marine play and veneered with 1/4 ply on Salon side, so now the bulkhead is 1" thick. Completely coated in epoxy and tabbed in with several layers of glass. The upper Veneer is Maple the lower was just 6mm marine ply. I covered the seem with chair rail and framed out the top with Sapele.
The V Birth bulkhead is 1/2" marine ply, and coated both sides in glass. I plan on just painting that white on both sides, and possibly tiling the head side. Haven't decided yet.
Pics attached, Questions or concerns let me know.
