Pearson Boats - Model Specific Discussion > P34

Pearson 34 rudder shoe / bushing

(1/1)

Rol1964:
Searching for original design info with respect to the rudder pin as it sits in the shoe...is there supposed to be a bushing or did the pin simply sit in the bore of the bronze shoe? Can't find this info anywhere...possible purchase of a P34. Maybe the rudder installation was the same as several other models...?  Thanks for any help.

Rol1964:
I see there have been over 1300 views but no replies so here is what I learned (in case any of the 1300 viewers are lurking, wondering...;-) : the shoe does not have a bushing. The pin from the rudder sits right in the bore. There should be about 1/4" clearance of the rudder above and below the tab of the shoe. Cheers, Rol1964.

Navigation

[0] Message Index