Pearson Boats - Common Systems > Steering System, Hull Structure

Pearson 323 Skeg

<< < (2/2)

323Voyager:
Just wanted to follow up with progress. I had the bottom bead blasted and have been fairing and fixing other little issues. I also fiberglassed two of the thru hulls shut that are no longer being used.
As per Alma's advice I covered the bronze bolts. I used acrylic (Not Silicone) house caulk to cover the bolt heads. The epoxy stuck to it fine. Then used 10 oz glass to cover it over and faired with total boat's fairing compound.
Hopefully it lasts, but it seems to be a solid repair.
Next will be barrier coating.
Thanks for all the advice, I was worried it was more then a cosmetic repair.

Navigation

[0] Message Index

[*] Previous page