Pearson Boats - Common Systems > Engine and Drive Train

throttle cable end

(1/1)

Frayed Knot:
I have an Volvo MD11c.  The throttle control cable end, that connects to the ball on throttle shaft is shot.  It is also plastic.  I am looking for replacement or part number.  Any help would be appreciated.

Dolce_Vita:
I believe Pearson originally used Morse cables.  Searching for "Morse Throttle Cable" leads to this:

https://www.amazon.com/Control-Throttle-Cable-Female-Thread/dp/B00W8BZ1PI/ref=sr_1_7?keywords=morse+cable&qid=1666186819&qu=eyJxc2MiOiI0LjMwIiwicXNhIjoiNC40NSIsInFzcCI6IjMuNjIifQ%3D%3D&sr=8-7

Might be what you're looking for.

Frayed Knot:
The ball end is part of the throttle shaft on the motor it does not unscrew.  I will keep looking.  The threaded end to the plastic piece  is 5mm or 10-32, not sure of ball size will have to measure this weekend.  I had better hurry leaving for our annual race in Southport.NC Thursday the 28th.  If I have to use zip ties to hold it on I will...

Navigation

[0] Message Index

Go to full version