Author Topic: New 323 Owner  (Read 7846 times)

Trouttfish

  • P323
  • Newbie
  • *
  • Posts: 5
  • Karma: 0
  • Pearson Yacht Enthusiast
    • View Profile
  • Model: P323
  • Vessel Name: Kropka
  • City: Tampa
  • State: FL
New 323 Owner
« on: November 21, 2017, 12:09:35 PM »
Hi All!
      I am the proud new owner of Kropka, hull 82. I’ve had a bumpy start with her so far, but I’m loving every minute of it!

edithcollins

  • P323
  • Jr. Member
  • *
  • Posts: 41
  • Karma: 0
  • P323 Enthusiast
    • View Profile
  • Model: P323
  • Vessel Name: Encontrado
  • City: Lake Lanier
  • State: GA
Re: New 323 Owner
« Reply #1 on: November 21, 2017, 02:12:21 PM »
Welcome to the family!!!

rnebergall

  • P323
  • Jr. Member
  • *
  • Posts: 49
  • Karma: 0
  • P323 Owner
    • View Profile
  • Model: P323
  • Vessel Name: Zufrieden
  • City: Grand Marais
  • State: MN
Re: New 323 Owner
« Reply #2 on: November 21, 2017, 04:42:01 PM »
Congratulations, and welcome.  There are many very knowledgeable 323 owners on this site.  Chances are, your questions can be answered here.  Good luck, and here's hoping the start has not been too bumpy.

Captain Bri

  • Brian
  • Ensign
  • Sr. Member
  • *
  • Posts: 142
  • Karma: 2
  • Sailmaker
    • View Profile
    • RedSkySails.com
  • Model: Ensign
  • City: Anytown
  • State: Ct
Re: New 323 Owner
« Reply #3 on: November 24, 2017, 06:34:02 PM »
Welcome aboard - it looks like we have a few photos of her on the website from a previous owner.

Men and Ships; Rot in Port

Sailingirl

  • P323
  • Newbie
  • *
  • Posts: 2
  • Karma: 0
  • Pearson 323
    • View Profile
  • Model: P323
  • City: Carolina Beach
Re: New 323 Owner
« Reply #4 on: December 06, 2017, 07:40:08 PM »
Hi All!
      I am the proud new owner of Kropka, hull 82. I’ve had a bumpy start with her so far, but I’m loving every minute of it!

What issues did you have?

Trouttfish

  • P323
  • Newbie
  • *
  • Posts: 5
  • Karma: 0
  • Pearson Yacht Enthusiast
    • View Profile
  • Model: P323
  • Vessel Name: Kropka
  • City: Tampa
  • State: FL
Re: New 323 Owner
« Reply #5 on: December 27, 2017, 10:24:32 AM »
Well, I had the port side upper and forward lower shrouds snap on me the first trip, the transmission cable fail on the second, and the jib rip on the third, but if I keep on fixing things at this rate the boat will be practically new by the end of next year!

Chance

  • P323
  • Jr. Member
  • *
  • Posts: 30
  • Karma: 5
  • P323 Enthusiast
    • View Profile
  • Model: P323
  • Vessel Name: CHANCE
  • City: Milwaukee
  • State: WI
Re: New 323 Owner
« Reply #6 on: December 27, 2017, 07:21:57 PM »
Can you explain what failed on your shrouds, was it turnbuckles or swage fittings or wire.  Could  it  had been seen as possible problem before it happen ?  My shrouds are check every year but there 40 years old ,fresh water. They still look okay but are old .

Alma

  • P323
  • Hero Member
  • *
  • Posts: 343
  • Karma: 10
    • View Profile
    • GeneSmithStudio
  • Model: P323
  • Vessel Name: ALMA
  • City: Forked River, NJ
  • State: NJ
Re: New 323 Owner
« Reply #7 on: December 27, 2017, 09:46:34 PM »
I'm running original standing rigging except for the forestay which was included with my roller furler. I think our original rigging is better material than the newer stuff. A look at the picture hanging thread on a Cape Dory will show how robust the standing rigging Bill Shaw specified is. It is not an excuse to not inspect- a broken shroud could kill someone...

But there is no reason to enrich riggers when the 323's rigging is so over built.

Rusty Pelican

  • P323
  • Sr. Member
  • *
  • Posts: 239
  • Karma: 5
  • http://rustypelican.blogspot.com/
    • View Profile
  • Model: P323
  • Vessel Name: Rusty Pelican
  • City: Hingham
  • State: MA
Re: New 323 Owner
« Reply #8 on: January 18, 2018, 05:15:49 PM »
I pull my mast every year; for the past 35 years.
I inspect every year;  trying to come up with an excuse to re-rig.
Still waiting.

BobG

Trouttfish

  • P323
  • Newbie
  • *
  • Posts: 5
  • Karma: 0
  • Pearson Yacht Enthusiast
    • View Profile
  • Model: P323
  • Vessel Name: Kropka
  • City: Tampa
  • State: FL
Re: New 323 Owner
« Reply #9 on: April 03, 2018, 04:10:12 PM »
My shrouds and deck hardware were fitted with turnbuckle like fittings with a double end threaded stud in the center. It was the threaded stud that failed. The wire seemed ok, but the fittings at the ends were rusty so I swapped em’ out. One less thing to worry about!