Author Topic: Replacing opening ports with New Found Metal  (Read 2253 times)

mjscottinnc

  • P323
  • Newbie
  • *
  • Posts: 22
  • Karma: 1
  • Pearson Sailor
    • View Profile
    • The restoration of Aine
  • Model: P323
  • Vessel Name: Aine
  • City: New Bern
  • State: NC
Replacing opening ports with New Found Metal
« on: August 31, 2015, 09:57:52 AM »
I'm replacing all the opening ports with New Found Metal 414 SS ports, has anyone accomplished this? Any advice? This will be my next task next weekend.
P323 - Hull 330

Dolce_Vita

  • P323
  • Hero Member
  • *
  • Posts: 392
  • Karma: 8
    • View Profile
    • S/V Dolce Vita
  • Model: P323
  • Vessel Name: Dolce Vita
  • City: Pasadena
  • State: MD
Re: Replacing opening ports with New Found Metal
« Reply #1 on: August 31, 2015, 12:29:46 PM »
I haven't done this (yet!) but I know someone who has.

Ed & Lesa Smith own P-323 hull number 136 "Sheets-n-Giggles".  Ed replaced their ports with Newfound Metals ones a couple of years ago.  He's not a member here, but their blog address is http://www.sheets-n-giggles.blogspot.com/

I'll pm you with his e-mail address.
@(^.^)@  Ed
1977 P-323 #42 "Dolce Vita"
with rebuilt Atomic-4

selene

  • P323
  • Hero Member
  • *
  • Posts: 292
  • Karma: 4
  • Mighty Member
    • View Profile
  • Model: P323
  • Vessel Name: Selene
  • City: Redwood City
  • State: CA
Re: Replacing opening ports with New Found Metal
« Reply #2 on: July 19, 2016, 01:59:02 PM »
Any updates on this?  I think I may be going down the same path, as another Bomar falls apart....NFM are my favored supplier.  Will be doing some preliminary measurements tomorrow.

Impetuous

  • P36
  • Newbie
  • *
  • Posts: 1
  • Karma: 0
  • Pearson Yacht Enthusiast
    • View Profile
  • Model: P36
  • Vessel Name: Impetuous
  • City: Annapolis
  • State: MD
Re: Replacing opening ports with New Found Metal
« Reply #3 on: October 16, 2018, 08:36:06 PM »
I’m getting ready to replace all ports with NFM opening ports on my 36-2. I’m considering
 replacing non-opening ports (with angled fronts) with opening ports. Any thoughts?

selene

  • P323
  • Hero Member
  • *
  • Posts: 292
  • Karma: 4
  • Mighty Member
    • View Profile
  • Model: P323
  • Vessel Name: Selene
  • City: Redwood City
  • State: CA
Re: Replacing opening ports with New Found Metal
« Reply #4 on: October 21, 2018, 10:10:44 PM »
I am half way through replacing the 4 ports with NFM. I opted for the bronze.  2 in, 2 in progress - I did the port pair first, doing them at the same time to ensure good alignment.

I am intending to do a writeup, but would be happy to answer any questions.

p

Dolce_Vita

  • P323
  • Hero Member
  • *
  • Posts: 392
  • Karma: 8
    • View Profile
    • S/V Dolce Vita
  • Model: P323
  • Vessel Name: Dolce Vita
  • City: Pasadena
  • State: MD
Re: Replacing opening ports with New Found Metal
« Reply #5 on: October 24, 2018, 06:59:10 AM »
Photos! ;)
@(^.^)@  Ed
1977 P-323 #42 "Dolce Vita"
with rebuilt Atomic-4

selene

  • P323
  • Hero Member
  • *
  • Posts: 292
  • Karma: 4
  • Mighty Member
    • View Profile
  • Model: P323
  • Vessel Name: Selene
  • City: Redwood City
  • State: CA
Re: Replacing opening ports with New Found Metal
« Reply #6 on: October 29, 2018, 12:24:33 PM »
Okay, you asked for it....

1) Porthole and spacer. The P323 cabin wall thickness is 1/4"-1/2", so a teak spacer is required. And before I get flamed, this is layer 1 of about 6 of the varnish on the spacer!  Also note that the teak spacers needed to be trimmed to fit, as there is not sufficient height for them to be installed otherwise. Easy job - some measuring, a few minutes with a plane.

2) As in other projects, there is a void between the liner and the deck, which IMHO needs to be filled. I opted for fiberglass cloth and thickened epoxy.

3) This gives you some idea of how they look installed

4) And an exterior view. I expect the exterior to go green fairly quickly; I intend to keep the interior shiny.

Alma

  • P323
  • Sr. Member
  • *
  • Posts: 210
  • Karma: 6
    • View Profile
    • GeneSmithStudio
  • Model: P323
  • Vessel Name: ALMA
  • City: Cape May
  • State: NJ
Re: Replacing opening ports with New Found Metal
« Reply #7 on: October 30, 2018, 10:21:38 AM »
Fine work. Now you can remove the big ones and install more like this very special 323 that had opening ports from the factory-
If you're sailing past Cape May give us a shout-out!